Translate

Search

Licenses

  • BHS-66
  • BJ3885
  • CDO-4469
  • GR0090
  • IRS2972M
  • IZ5145
  • KG2175
  • MPT1127
  • MSS0009M
  • PFD_Shauna.Brooke
  • PFFT0055
  • PTE0660
  • SATC2098
  • SW6445
  • Spazz-324
  • TPP00243
  • Zindy - 3108
2012. Powered by Blogger.
Tuesday, September 25, 2012

This was written on Sept. 25, 2012
This tut is intended for those that have a working knowledge of PSP
This tutorial was written in PSP X3 but can be done in any version.
My tutorials are only meant as a guide. Id love to see your creations.



           Supplies are :

Scrapkit i  used is  called AARRRRGGGGGGGGGGG, It is FTU and you  can get it Here.
Mask I used is WSL262 you can get  the  mask Here.
Tube i  used is from Leonardo Preda you can get his work Here.
You will also need an iZ License to use his work :)
         Filters Used:
 Radial Pox



                Ok Lets Get Started

I opened a 600x600 transparent image. You can always  resize later.
I used the #6 paper and then used the  Mask WSL 262 and resized it to 450x450 and put it in the original image in the  middle.
 I used the sequins next and  put them in the  middle of the mask i  used the  drop shadow on it.
 V & H - 3
Opacity - 50
Blur - 5.00
 Color : Black
Then u  went to Adjust- Sharpen - High Pass Sharpen - Radius - 30.00 Strength - 100 Blend Mode Hard Light.

I now got the  only frame they have and resize it by 75% and put it in the  middle of the sequins but i made it so that the  sequins are visible  on the  top right and  bottom left. i take  the  same frame and resize it again 75%. Then go to Image - Free Rotate - Direction Left -  Free at 10.50. I moved the smaller frame to the top left and used the  same drop shadow.


I am going to  take the  ladder, resize it 75% and move it to the top right. I use Radial Pox here, which is  in  Effects - Vm Distortion - Radial Pox.

Frequency -117
Strength - 189
Amplify - 128
FineTuning - 39
 Same Drop Shadow
Move the  original ladder back where  it was.
I take the  screw2 and  place  it so that the top of the rope isnt showing.

Next i  take the Parrot and  place it  on the  top piece of  wood on the right, i  take the eraser tool and erase part of his feet so that  his toes arent showing. Then i take the chest and  resize it 75% and place it at the bottom of the  latter. I take the  scroll and resize it 3x at 75%. I take the X and resize it 4x and place it sort of in the  middle or little to the right.

I grabbed the Arrgg label resized it 3 times put it on the  scroll.I take skull2 and put in so that  it goes over  both  frames  on the  left. and added drop shadow. I take the  coins and  put them on the  bottom of the  chest.I took the  hook and  put it on one side of the  chest and then took the  ink pen resized it twice 75% and put it  near the hook.
 I take  my tube and  place it  on the coins that  i  put on earlier. You are done!
Dont  forget to  put  the artists info on the  taggie!!


0 comments:

Post a Comment

Followers

My Blinkie

Photobucket

I CT For

DS photo afk32g.gif  photo pamct.gif

Good Reads